Skip to content

Recent Publications

Publications are listed from the most recent.

Y. Cormier, P. Dupuis, B. Jodoin, A. Corbeil, “Net shape fins for compact heat exchanger produced by cold spray”, Journal of Thermal Spray TechnologyTechnology, Volume 22, October 2013, pp. 1210-1221

Link: http://dx.doi.org/10.1007/s11666-013-9968-x

A. Bacciochini, M.I. Radulescu, M. Yandouzi, G. Maines, J.J. Lee, B. Jodoin, “Reactive structural materials consolidated by cold spray: Al–CuO thermite”, Surface and Coatings Technology, Volume 226, July 2013, pp. 60-67

Link: https://www.sciencedirect.com/science/article/pii/S0257897213002995

R. Ghelichi, D. MacDonald, S. Bagherifarda, H. Jahed, M. Guagliano, B. Jodoin, “Microstructure and fatigue behavior of cold spray coated Al5052”, Acta Materialia,  in press ;

Link: http://dx.doi.org/10.1016/j.actamat.2012.08.020

H. Bu, M. Yandouzi, C. Lu, D. MacDonald, B. Jodoin, “Cold spray blended Al + Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy”, Surface and Coatings Technology, Volume 207, August 2012, pp. 155-162

Link: http://www.sciencedirect.com/science/article/pii/S0257897212006196

M. Karimi, G.W. Rankin*, B.  Jodoin, “Shock-wave induced spraying: Gas and particle flow and coating analysis”, Surface and Coatings Technology,  Volume 207 , August 2012, p. 435-442

Link: http://www.sciencedirect.com/science/article/pii/S0257897212007323

H. Bu, M. Yandouzi, C. Lu, B. Jodoin, “Post-heat Treatment Effects on Cold-Sprayed Aluminum Coatings on AZ91D Magnesium Substrates”, Journal of Thermal Spray Technology, 2012, Volume 21 (3-4), p. 731-739

Link: http://link.springer.com/article/10.1007/s11666-012-9785-7

A. Bacciochini, M.I. Radulescu, Y. Charron-Tousignant, J. Van Dyke, M. Nganbe, M. Yandouzi, J.J. Lee, B. Jodoin, “Enhanced reactivity of mechanically-activated nano-scale gasless reactive materials consolidated by cold spray”, Surface and Coatings Technology, 2012, Volume 206 , Number 21, Pages 4343-4348

Link: http://www.sciencedirect.com/science/article/pii/S0257897212001168

G. Bérubé, M. Yandouzi, A. Zúñiga, L. Ajdelsztajn, J. Villafuerte, B. Jodoin, “Phase stability of Al-Fe-V-Si Coatings Produced by Cold Gas Dynamic Spray Process using rapidly solidified feedstock materials”,  Journal of Thermal Spray Technology, 2012, Volume 21, Number 2, Pages 240-254

Link: http://adsabs.harvard.edu/abs/2011JTST..tmp..196B

M. Yandouzi, H. Bu, M. Brochu and B. Jodoin, “Nanostructured Al-Based Metal Matrix Composite Coating Production by Pulsed Gas Dynamic Spraying Process”, Journal of Thermal Spray Technology, 2012, Volume 21, Numbers 3-4, Pages 609-619

Link: http://www.springerlink.com/content/q65614387286848n/

M. Karimi, B. Jodoin and G. Rankin, “Shock-Wave-Induced Spraying: Modeling and Physics of A New Spray Process”, Journal of Thermal Spray Technology,  2011, Volume 20, Number 4, Pages 866-881

Link: http://www.springerlink.com/content/b722042714x82870/

J. Assaad, A. Corbeil, P. Richer and B. Jodoin, “Novel Stacked Wire Mesh Compact Heat Exchangers Produced Using Cold Spray”, Journal of Thermal Spray Technology,  2011, Volume 20, Number 6, Pages 1192-1200

Link: http://www.springerlink.com/content/h1g1273234hg2237/

H. Bu, M. Yandouzi, C.  Lu, B. Jodoin, “Effect of heat treatment on the intermetallic layer of cold sprayed aluminum coatings on magnesium alloy”, Surface and Coatings Technology, 205, Issue 19, 25 June 2011, Pages 4665-4671

Link: http://www.sciencedirect.com/science/article/pii/S025789721100363X

M. Yandouzi, A.J. Böttger, R.W.A. Hendrikx, M. Brochu, P. Richer, A. Charest and  B. Jodoin, “Microstructure and Mechanical Properties of B4C Reinforced Al-Based Matrix Composite Coatings Prepared by CGDS and PGDS Processes”, Surface and Coatings Technology, 205, December 2010, p. 2234-2246

Link: http://www.sciencedirect.com/science/article/pii/S0257897210008005

P. Richer, M. Yandouzi, L. Beauvais and B. Jodoin, “Oxidation Behaviour of CoNiCrAlY Bond Coats Produced by Plasma, HVOF and Cold Gas Dynamic Spraying”, Surface and Coatings Technology, 204 (24), September 2010, p. 3962-3974

Link: http://www.sciencedirect.com/science/article/pii/S0257897210002379

M. Yandouzi, P. Richer and B. Jodoin, “SiC Particulate Reinforced Al-12Si Alloy Composite Coatings Produced by the Pulsed Gas Dynamic Spray Process: Microstructure and Properties”, Surface and Coatings Technology, 203 (20-21), July 2009, p. 3260-3270

Link: http://www.sciencedirect.com/science/article/pii/S0257897209003454

F. Robitaille, M. Yandouzi, S. Hind and B. Jodoin, “Metallic Coating of Aerospace Carbon/Epoxy Composites by the Pulsed Gas Dynamic Spraying Process”, Surface and Coatings Technology, 203 (19), June 2009, p. 2954-2960

Link: http://www.sciencedirect.com/science/article/pii/S0257897209002473

P. Richer, A. Zúñiga, M. Yandouzi and B. Jodoin, “CoNiCrAlY Microstructural Changes Induced During Cold Gas Dynamic Spraying”, Surface and Coatings Technology,Volume 203 (3-4), November 2008, p. 364-371

Link: http://www.sciencedirect.com/science/article/pii/S0257897208008505

M. Yandouzi and B. Jodoin, “Microstructure and Properties of WC-based Coatings prepared by Pulsed Gas Dynamic Spraying Process: Influence of Process Variables”, Surface and Coatings Technology, Volume 203 (1-2), October 2008, p. 104-114

Link: http://www.ingentaconnect.com/content/maney/se/2010/00000026/00000006/art00001?crawler=true

E. Irissou, J-G Legoux, A. Ryabinin, B. Jodoin and C. Moreau, “Review on Cold Spray Process and Technology: Part I – Intellectual Property”, Journal of Thermal Spray Technology, Volume 17 (4) , December 2008, p. 495-516

Link: http://www.springerlink.com/content/h704237421282646/

M. Yandouzi and B. Jodoin, “WC-based composite coatings prepared by the pulsed gas dynamic spray process: Effect of the feedstock powders”, Surface and Coatings Technology, Volume 202 (16), May 2008, p. 3866-3877

Link: http://www.sciencedirect.com/science/article/pii/S0257897208000790

E. Sansoucy, P. Marcoux, L. Ajdelsztajn and B. Jodoin, “Properties of SiC-Reinforced Aluminum Alloy Coatings Produced by the Cold Spray Deposition Process”, Surface and Coatings Technology, Volume 202 (16), May 2008, p. 3988-3996

Link: http://www.sciencedirect.com/science/article/pii/S0257897207006159

S. Cadney, M. Brochu, P. Richer and B. Jodoin, “Cold Gas Dynamic Spraying as a Method for Freeforming and Joining Materials”, Surface and Coatings Technology, Volume 202 (12), March 2008, p. 2801-2806

Link: http://www.sciencedirect.com/science/article/pii/S0257897207010481

E. Sansoucy, G.E. Kim, A. L. Moran and B. Jodoin, “Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process”, Journal of Thermal Spray Technology, Volume 16 (5- 6), December 2007, p.651-660.

Link: http://www.springerlink.com/content/3x66064pk57m1373/

M. Yandouzi, E. Sansoucy, L. Ajdelsztajn, B. Jodoin, “WC-based Cermet Coatings Produced by Cold Gas Dynamic and Pulsed-Gas Dynamic Spraying Processes”, Surface and Coatings Technology, Volume 202 (2), November 2007, p. 382-390

Link: http://www.sciencedirect.com/science/article/pii/S0257897207006159

B. Jodoin, P. Richer, G. Bérubé, L. Ajdelsztajn, M. Yandouzi, “Pulsed-Gas Dynamic Spraying: Process Analysis, Development and Selected Coating Examples”, Surface and Coatings Technology, Volume 201 (16-17), May 2007, p. 7544-7551

Link: http://www.sciencedirect.com/science/article/pii/S0257897207001454

L. Ajdelsztajn, A. Zuniga, B. Jodoin and E. Lavernia, “Cold Gas Dynamic Spraying of a High Temperature Al Alloy”, Surface Coatings and Technology, Volume 201 (6), December 2006, p. 2109-2116

Link: http://www.sciencedirect.com/science/article/pii/S0257897205006468

B. Jodoin, L. Ajdelsztajn, P. Richer, E. Sansoucy and E.J. Lavernia, “Effect of Particle Size, Morphology, and Hardness on Cold Gas Dynamic Sprayed Aluminum Alloy, Surface and Coatings Technology, Volume 201 (6), December 2006, p. 3422-3429.

Link: http://www.sciencedirect.com/science/article/pii/S025789720600778X

L. Ajdelsztajn, B. Jodoin and J. Schoenung, “Synthesis and Mechanical Properties of Nanocrystalline Ni Coatings Produced by Cold Gas Dynamic Spray”, Surface and Coatings Technology, Volume 201 (3-4), October 2006, p. 1166-1172.

Link: http://www.sciencedirect.com/science/article/pii/S0257897206000910

L. Ajdelsztajn, B. Jodoin, P. Richer, E. Sansoucy and E.J. Lavernia, “Cold Gas Dynamic Spray in of Fe-based Amorphous Alloy”, Journal of Thermal Spray Technology, Volume 15 (4), December  2006.

Link: http://www.springerlink.com/content/a74438313v064p29/

L. Ajdelsztajn, A. Zuniga, B. Jodoin and E.J. Lavernia, “Cold Spray Processing of Nanocrystalline Al-Cu-Mg-Fe-Ni Alloy with Sc”, Journal of Thermal Spray Technology, Volume 15 (2), June 2006,  p. 184-190.

Link: http://www.springerlink.com/content/g71741g642l7p646/

K. Taylor, B. Jodoin and and J. Karov, “Particle Loading Effect in Cold Spray”, Journal of Thermal Spray Technology, Volume 15 (2), June 2006, p.273- 279.

Link: http://www.springerlink.com/content/118789n762640323/

B. Jodoin, F. Raletz and M. Vardelle, “Cold Spray Modeling and Validation”, Surface and Coatings Technology, Volume 200, April 2006, p. 4424-4432

Link: http://www.sciencedirect.com/science/article/pii/S0257897205003853

L. Ajdelsztajn, B. Jodoin,  G.E. Kim, J. Schoenung and J. Mondoux, “Cold Spray Deposition of Nanocrystalline   Aluminum Alloys”, Met.  And Mat. Trans. A, Volume 36, March 2005, p.657-666.

Link: http://www.springerlink.com/content/q6472004x6w773h5/