Skip to content

Publications

Chapters in Books

  • Tesfamariam, S., and Martín-Pérez, B. (2010). “Stress wave propagation for evaluation of reinforced concrete structures.” Non-Destructive Evaluation of Reinforced Concrete Structures, C. Maierhofer, H.-W. Reinhardt, and G. Dobmann, eds., Woodhead Publishing Ltd., Cambridge, UK, 417-440.

Refereed Journals

  • Tanaka, H., Li, W., Baskaran, A., and Martín-Pérez, B. (2011). “Wind resistance correlation of adhesive applied roofing system.” Journal of Testing and Evaluation, 39(6), 1189-1204.
  • Baskaran, B., Current, J., Martín-Pérez, B., and Tanaka, H. (2011). “Quantification of uplift resistance of adhesive-applied low-slope roof configurations subjected to tensile loading test protocol.” Journal of Materials in Civil Engineering, 23(6), 903-914.
  • Martín-Pérez, B., Deif, A., Cousin, B., Zhang, C., Bao, X., and Li, W. (2010). “Strain monitoring in a reinforced concrete slab sustaining service loads by distributed Brillouin fibre optic sensors.” Canadian Journal of Civil Engineering, 37(10), 1341-1349.
  • Deif, A., Martín-Pérez, B., Cousin, B., Zhang, C., Bao, X., and Li, W. (2010). “Detection of cracks in a reinforced concrete beam using distributed Brillouin fibre sensors.” Smart Materials and Structures, 19(5), 055014.
  • Tesfamariam, S., and Martín-Pérez, B. (2008). “Bayesian belief network to assess carbonation-induced corrosion in reinforced concrete.” Journal of Materials in Civil Engineering, 20(11), 707-717.
  • Martín-Pérez, B., Pantazopoulou, S.J., and Thomas, M.D.A. (2001) “Numerical solution of mass transport equations in concrete structures.” Computers & Structures, 79(13), 1251-1264.
  • Martín-Pérez, B., and Pantazopoulou, S.J. (2001) “Effect of bond, aggregate interlock and dowel action on the shear strength degradation of reinforced concrete.” Engineering Structures, 23(2), 214-227.
  • B. Martín-Pérez, H. Zibara, R.D. Hooton, and M.D.A. Thomas (2000) “A study of the effect of chloride binding on service life predictions.” Cement and Concrete Research, 30(8), 1215-1223.
  • B. Martín-Pérez and S.J. Pantazopoulou (1998) “Mechanics of concrete participation to cyclic shear resistance of r.c.” Journal of Structural Engineering, 124(6), 633-641.

Refereed Conference Proceedings

  • Chabi, P., Isgor, O.B., Martín-Pérez, B., and Ghods, P. (2013). “Effectiveness of half-cell potential mapping in corrosion assessment of reinforcement in loaded concrete bridge decks.” 3rd Specialty Conference on Material Engineering and Applied Mechanics, Montréal, Québec, Canada, Paper 052.
  • Bernard, S., and Martín-Pérez, B. (2013). “Finite element modelling of reinforced concrete beams with corroded shear reinforcement.” 3rd Specialty Conference on Material Engineering and Applied Mechanics, Montréal, Québec, Canada, Paper 027.
  • Deif, A., Martín-Pérez, B., and Cousin, B. (2012). “Further study of chloride penetration in a RC slab sustaining in-service loads.” Bridge Maintenance, Safety, Management, Resilience and Sustainability, F. Biondini, and D. M. Frangopol, eds., Taylor & Francis, London, 2930-2937.
  • Mohammed, A. M., Almansour, H. H., and Martín-Pérez, B. (2012). “State-of-the-art in nonlinear modeling of concrete frame structures under the combined effect of ultimate loading and reinforcement corrosion”. 3rd International Structural Specialty Conference, Edmonton, Alberta, Canada, Paper 1127, 10 pp.
  • Baingo, D., and Martín-Pérez, B. (2011). “Stochastic finite element modelling of reinforced concrete beams affected by reinforcement corrosion.” 2nd International Engineering Mechanics and Materials Specialty Conference, Ottawa, Ontario, Canada, Paper 067, 10 pp.
  • Mohammed, A. M., Almansour, H. H., and Martín-Pérez, B. (2011). “Combined effect of reinforcement corrosion and seismic loads on RC bridge columns: modelling.” 2nd International Engineering Mechanics and Materials Specialty Conference, Ottawa, Ontario, Canada, Paper 033, 10 pp.
  • Mohammed, A. M., Almansour, H. H., and Martín-Pérez, B. (2010). “Modelling RC bridge columns under the combined effects of traffic and reinforcement corrosion.” 8th International Conference on Short & Medium Span Bridges, F.M. Bartlett, ed., Niagara Falls, Ontario, Canada, Paper 168, 10 pp.
  • Cousin, B., and Martín-Pérez, B. (2010). “Chloride ingress in pre-tensioned prestressed concrete beams and the effect of corrosion on their structural behaviour.” Sixth International Conference on Concrete under Severe Conditions, Environment & Loading (CONSEC ’10), Castro-Borges, Moreno, Sakai, Gjorv, and Banthia, eds., CRC Press/Balkema Taylor & Francis Group, London, Mérida, Yucatán, México, 247-256.
  • Jabbour, S., and Martín-Pérez, B. (2010). “Cover cracking in RC columns subjected to reinforcement corrosion under sustaining load.” Fracture Mechanics of Concrete and Concrete Structures – Assessment, Durability, Monitoring and Retrofitting of Concrete Structures, B.H. Oh et al., eds., Korea Concrete Institute, Seoul, Korea, 901-908.
  • Deif, A., Martín-Pérez, B., Cousin, B., Zhang, C., Li, W., and Bao, X. (2009). “A comparison of strains measured by optical fibres and strain gauges with theory for a loaded bridge deck.” NDTCE’09, 7th International Symposium on Non-Destructive Testing in Civil Engineering, Nantes, France, June 30th-July 3rd, 2009, Paper 106 (6 pp.).
  • Cousin, B., Deif, A., and Martín-Pérez, B. (2009). “Etude de l’intrusion d’ions chlorures dans des ouvrages en béton armé sous charge.” XXVIIèmes Rencontres de L’ Association Universitaire de Génie Civil, Saint-Malo, France, June 3rd-5th, 2009, 14 pp.
  • Deif, A., Martín-Pérez, B., and Cousin, B. (2009). “Experimental study of chloride penetration in an RC slab sustaining in-service loads.” Creep, Shrinkage and Durability of Concrete and Concrete Structures, T. Tanabe, K. Sakata, H. Mihashi, R. Sato, K. Maekawa, and H. Nakamura, eds., Taylor & Francis Group, London, UK, 1107-1113.
  • Zhang, C., Bao, X., Li, W., Chen, L., Deif, A., Cousin, B., and Martín-Pérez, B. (2008). “Crack detection in reinforced concrete beam by using of distributed Brillouin fiber sensor.” 19th International Conference on Optical Fibre Sensors, D. D. Sampson, ed., Proceedings of SPIE – The International Society for Optical Engineering, Article number 70041T (4 pp.).
  • Jabbour, S., and Martín-Pérez, B. (2007). “Analytical study of the effect of reinforcement corrosion on the behaviour of RC columns.” Concrete under Severe Conditions: Environment and Loading, F. Toutlemonde, K. Sakai, O. E. Gjørv, and N. Banthia, eds., Laboratoire central des ponts et chaussées, Paris, France, 411-418.
  • Zhou, K., Martín-Pérez, B., and Lounis, Z. (2005). “Finite element analysis of corrosion-induced cracking, spalling and delamination of RC bridge decks.” First Canadian Conference on Effective Design of Structures, Hamilton, Canada, 187-196.
  • Martín-Pérez, B., and Lounis, Z. (2003). “Numerical modelling of service life of reinforced concrete structures.” Second International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures, D. J. Naus, ed., RILEM, Bagneux, France, 71-79.
  • Martín-Pérez, B., and El Hussein H. Mohamed. (2000). “Determining the potential for reflection of cracks.” Fourth International RILEM Conference on Reflective Cracking in Pavements, A. O. Abd El Halim, D. A. Taylor, and El H. H. Mohamed, eds., RILEM, Bagneux, France, 115-124.
  • Martín-Pérez, B., Pantazopoulou, S. J., and Thomas, M. D. A. (1998). “Finite element modelling of corrosion in r.c. highway structures.” Concrete under Severe Conditions 2: Environment and Loading, O. E. Gjørv, K. Sakai, and N. Banthia, eds., E & FN Spon, London, UK, 354-363.
  • Martín-Pérez, B., and Pantazopoulou, S. J. (1997). “Modelling of cyclic shear in reinforced concrete.” Second Symposium on Applied Mechanics, Structures: Seismic Engineering (Annual Conference of CSCE, vol. 4), K. W. Neale and J. Proulx, eds., Canadian Society for Civil Engineering, Montreal, Canada, 209-218.
  • Martín-Pérez, B., and Pantazopoulou, S. J. (1996). “A study of the mechanical response of reinforced concrete to cyclic shear reversals.” Eleventh World Conference on Earthquake Engineering (CD-ROM Proceedings), Sociedad Mexicana de Ingeniería Sísmica A.C., ed., Elsevier Science Ltd., Paper No. 185 (8 pp.).
  • Vipulanandan, C., and Martín-Pérez, B. (1994). “Reprocessing of sintered and melt high temperature superconducting materials.” Materials and Processes for Environmental Protection: Materials Research Society Symposium Proceedings, Vol. 344, L. M. Quick, C. J. Adkins, P. N. Gadgil, and K. E. Voss, eds., Materials Research Society, Pittsburgh, 307-314.

Non-Refereed Conference Proceedings

  • Z. Lounis, B. Martín-Pérez, and O. Hunaidi (2001) “Decision support tools for life prediction and rehabilitation of concrete bridge decks.” NRCC/CPWA/IPWEA Seminar Series “Innovations in Urban Infrastructure,” APWA International Public Works Congress, pp. 67-77. Philadelphia, September.

Technical Reports

  • Lounis, Z., Martín-Pérez, B., Daigle, L., and Zhang, J. (2006). “Decision Support Tools for Service Life Prediction and Rehabilitation of Concrete Bridge Decks – Final Report.” Client report B5318.2, National Research Council Canada, Institute for Research in Construction, Ottawa, Canada, 261 pp.
  • Lounis, Z., and Martín-Pérez, B. (2003). “Service Life Prediction Models and Rehabilitation Methods of Corrosion-Damaged Concrete Bridge Decks.” National Research Coucil Canada, Institute for Research in Construction, Ottawa, Canada, 108 pp.
  • Martín-Pérez, B., and Nofal, M. (2002). “UMAR – Theory and User Manual: Version 1.0.” Internal Report 852, National Research Council Canada, Institute for Research in Construction, Ottawa, Canada, 112 pp.
  • Elhussein H. Mohamed, Khogali, W. E. I., Martín-Pérez, B., Zeghal, M., Geagea, Z., Janoo, V., Eaton, R., and Barna, L. (1999). “Utility Cut Restoration: Project Implementation Plan.” Internal Report 804, National Research Council Canada, Institute for Research in Construction, Ottawa, Canada, 56 pp.
  • Martín-Pérez, B. (1999). “Service Life Modelling of R.C. Highway Structures Exposed to Chlorides.” Ph.D. thesis, Department of Civil Engineering, University of Toronto, Toronto, Canada, 168 pp.
  • Thomas, M.D.A., Pantazopoulou, S.J., and Martín-Pérez, B. (1995). “Service Life Modelling of Reinforced Concrete Structures Exposed to Chlorides: A Literature Review.” Department of Civil Engineering, University of Toronto, Toronto, Canada, 45 pp.
  • Martín-Pérez, B. (1995). “A Study of the Mechanical Response of Reinforced Concrete to Cyclic Shear Reversals.” M.A.Sc. thesis, Department of Civil Engineering, University of Toronto, Toronto, Canada, 113 pp.

Abstracts and/or Papers Read

  • Chabi, P., Martín-Pérez, B., Isgor, O. B., and Ghods, P. (2011). “Comparative Investigation of Chloride-Induced Corrosion Detection Techniques in Reinforced Concrete Structures.” ACI Fall Convention, Session on “Rapid Nondestructive Testing of Reinforced Concrete Bridge Decks—From Theory to Practice,” sponsored by ACI Committee 228 (Nondestructive Testing of Concrete) and 342 (Evaluation of Concrete Bridges and Bridge Elements), Cincinnati, OH, October 16-20, 2011.
  • Martín-Pérez, B., Thomas, M. D. A., and Pantazopoulou, S. J. (1997). “Service Life Modelling of Highway Structures Exposed to Chloride Environments.” ACI Fall Convention on “Service Life Modelling,” organized by ACI Committee 365 (Service Life Prediction), Atlanta, GA, November 9-14, 1997.
  • Martín-Pérez, B., Thomas, M. D. A., and Pantazopoulou, S. J. (1997). “Service Life Modelling of Highway Structures Exposed to Chloride Environments.” Understanding Corrosion Mechanisms in Concrete: A key to Improving Infrastructure Durability, MIT, Cambridge, MA, July 27-31, 1997.
  • Martín-Pérez, B., and Pantazopoulou, S. J. (1997). “Mechanics of Concrete Participation to the Cyclic Shear Resistance of R.C. Members.” ACI Spring Convention on “Shear Related Issues for Seismic Regions,” organized by ACI Committee 445 (Shear and Torsion), Seattle, WA, April 6-10, 1997.

Other Publications

  • Martín-Pérez, B. (2000). “IRC tackles reflective cracking problem in pavements.” Construction Innovation, 5(1).
  • Martín-Pérez, B., Pantazopoulou, S.J., and Thomas, M.D.A. (1996). “Understanding corrosion of reinforcement in concrete through f.e. modelling.’’ Canadian Civil Engineer, 13(3), 8-9.

(Last updated July 16th, 2013.)